Pages

[Solved] Computer rapidly hangs-up for couple of sec and work normally later on.

If your computer hangs-up for a little time you must assure that it also gives a noise too when it got stops.

Follow these Steps.

1. Disconnect every cable connected to your CPU.

2. Open up the CPU case.

3. look for hard-disk.

4. see cables connected to it, disconnect it and clean it, by blowing into it.

5. clean hard-disk  by blowing to its connectors.

6. reconnect again all cables and turn PC on.

there you go.

if it still giving you those, its time to change you computer cables, they are damaged inside.


But it will work i did it severl time and it worked.

[Solved] My LED/LCD is not displaying anymore.

it's a common problem happens with everyone once in a while.

What happened with your PC is your RAM got dusty and its functions are not working properly.

Follow these steps.

1. Turn off the power supply.

2. disconnect every single cable from your CPU.

3. open up the CPU case.

4. look for where is RAM placed.

Do everything Slowly and patiently. Relax and do as i say.

5. take out the RAM. (there will be side locks on ram which you will unlock and then take out the RAM)

6. Clean the gold looking blocks with Tissue slowly.

7. put it back. Lock it properly. (be careful when you put it back, bc sometimes you didn't putted it back correctly, so check it thrice).

8. Put all the cables back and there you go. Turn on your PC and see the Holy magic.

i know right it feels so Good to see your computer screen back

[Solved] My LED/LCD is blinking. Turning off and on rapidly.

I have been facing this problem recently and was really worried bc i just brought a new LED, but here is how you can fix this peoblem.

No its not your Graphic card problem, im sure about that 95%

Follow these Steps.

1. disconnect and check if its dusty, clean it by blowing into it. then reconnect it again.


2. if problem still occurs, Then you have to change the HDMI cable or DVI whichever you are using. Because it's damaged inside. (that's what i did)


You no need to worry, its not a big problem.

[Solved] Install Google Play store in Coolpad (root)

It's possible to put Google Apps in Coolpad
it can be done on Other phones made by china who doesn't conatains Google Apps
This is a simple method but Always remember that you do it carefully just as i have written down here

1: Download these files




  • GoogleCalendarSyncAdapter.apk
  • GoogleContactsSyncAdapter.apk
  • GoogleLoginService.apk
  • GoogleServicesFramework.apk
  • OneTimeInitializer.apk
  • Phonesky.apk (this is google play)




  • Kingroot.apk
  • Root explorer.apk


  • 2: Copy All Files to your mobile SD card.


    3: Now install kingroot and open it, it will take a time to root your phone (do not touch phone until its not 100% Rooted)



    4: After that install Root Explorer.apk and open it,

    (If a rooting permission dialogue will appear press the ''Allow'' button) now what you gonna do is to copy following two files and copy them and now you go to ''Device/system/Apps'' and paste it





    Copy here
    5: now install the other four files


    6: Restart it and after restarting open Google Playstore (It must be on your menu)

    7: Now there will be a login screen and just login, make a new ID or use Exist one :) 






    How to enable Data Package on mobile (android) of Pakistani Sims (Mobilink/Jazz,Ufone,Telenor,Zong,Warid,Circle,dejuice).


     How to enable Data Package on mobile (android) of Pakistani Sims (Mobilink/Jazz,Ufone,Telenor,Zong,Warid,Circle,dejuice). 

    1.Goto your mobile settings.
    2. Now goto the more option(some mobile have other options try to figure out by your self).
     3.Now goto mobile Networks. 
     4.Chose your Network (which company's sim you have).
     5. After that now goto Access Point Names.
     6. Now just left side of your home button there is a option button press that and goto "New APN" option.
     7.Name you Network. i have mobilink.
     8.Now goto APN
     9.Set it as Google.com
     .10. Now Save that setting and you will see a option like this.
    .11. Now enable it 
    12. Enable your Package Data.